This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.
  • 0 voto(i) - 0 media
  • 1
  • 2
  • 3
  • 4
  • 5
[NA] problema culla motore
#1
gentili utenti, chiedo a voi per avere delucidazioni dai più esperti:

mi trovo obbligato a sostituire la culla motore della NA, il meccanico ne ha provate due, ed entrambe non fittavano. girovagando su internet l'80% delle persone mi conferma che le culle tra 1.6 e 1.8 sono uguali, ma sul nutz un utente scrive questo:


front subframe does not fit. 100% it doesnt. The rear holes dont line up.

The rack mounts are different.

There are a few styles of subframe.

Front
Mk1 1.6
Mk1 1.8 (same mounting as 1.6 but has holes with captive nuts for braces)
Late Mk1 1.8 (has a fatter brace on the rear of the front subframe which uses 4 bolts instead of 2)
Then you have the mk2 which the rear mounting holes will not line up.. at all. They have been fitted to cars in the past, but it will be wrong as you wont get the last bolts in.

Rears
Mk1 1.6
Mk1 1.8 with the brace bar tabs
Mk2 with brace tabs that sit at a different angle. This one will fit the mk1 but neither the mk1 or mk2 brace will fit as the holes in the floor behind the seats dont match.
Mk2.5 is the same as mk2, but the brace is more substantial and mounts differently to the car floor.

Hope that clears up a load of guessed answers you've had already... and why do i know this.. cause i've just sorted the pile at autolink.. we have far too many of these things.

chi ha avuto questo tipo d'esperienza? chi mi conferma o smentisce ciò?  il meccanico mi dice che ballano 5mm dall'interasse posteriore e la scocca.
grazie
  Cita messaggio
#2
Interessante.
Questo potrebbe spiegare perché la mia culla tubolare non centrava in maniera precisa i fori.
La ND non esiste.
  Cita messaggio
#3
come hai risolto Fletch?
  Cita messaggio
#4
Ho venduto l'auto prima di montarla.
La ND non esiste.
  Cita messaggio
#5
Delle foto e delle misure precise aiuterebbero.

Sicuro non abbia preso delle culle NB?
  Cita messaggio


Discussioni simili
Discussione Autore Risposte Letto Ultimo messaggio
  [NB] Problema sospensione giunto sferico superiore cilique 6 739 02-09-2023, 16:37
Ultimo messaggio: cilique
  [ND] Problema altezza differente con Blistein e molle H&R 28764 Arak 4 1,321 29-10-2022, 21:07
Ultimo messaggio: Arak
  [NB] Supporti motore, cambio e differenziale omermon 20 6,158 06-08-2021, 09:10
Ultimo messaggio: pierpower
  [NA/NB]  Problema depowering steering rack Maestrozen39 24 5,015 24-08-2020, 19:25
Ultimo messaggio: Kublai
  [NB FL] Problema Assetto ammo Orap + molle Eibach piano.davide 62 29,071 18-04-2018, 13:43
Ultimo messaggio: Jack
  [NC] Problema distanziali! peppone620 55 12,477 16-04-2017, 23:15
Ultimo messaggio: Flex
  [NC] Problema bilstein b12!!! Frahazard 5 3,952 21-10-2016, 19:41
Ultimo messaggio: lore87
  [NB] Problema cuscinetti? MacchiaNera 20 5,117 22-09-2016, 06:48
Ultimo messaggio: effeffe
  [NB] problema idroguida jhonnybravo 4 1,465 20-07-2016, 22:53
Ultimo messaggio: jhonnybravo
  [NB] Problema cigolio con cambio antirollio Wolfango 7 2,625 01-03-2016, 19:51
Ultimo messaggio: Mac



Utenti che stanno guardando questa discussione: 1 Ospite(i)