| Front: | Rear: | slight understeer | neutral | slight oversteer |
| 20mm | 11mm | 12mm | ||
| 13/16" (20.6mm) | 11mm | 12mm | 1/2" (12.7)mm | |
| 7/8 (22.2mm) | 12mm | 1/2" (12.7mm) | 9/16" (14.3mm) | |
| 15/16" (23.8mm) | 1/2" (12.7mm) | 9/16" (14.3mm) | 15mm | |
| 24mm | 1/2" (12.7mm) | 9/16" (14.3mm) | 15mm | |
| 1" (25.4mm) | 9/16" (14.3mm) | 15mm | 5/8" (15.8mm) |
Front:
19mm - Mazda (NA)
20mm - Mazda (NA Type R)
13/16" - Addco
22mm - Mazda (NB)
23mm - Mazdaspeed
7/8" - Addco, BSP, Flyin' Miata (1.6), Jackson Racing
24mm - Eibach
15/16" - Racing Beat, Motorsports, PBC
1" - Pettit, Helwig, Ground Control, Suspension Techniques, Rod Millen, Flyin' Miata (1.8)
25mm - H&R NA
26mm H&R NB
Note: to install the 20mm 1994+ front 'R' bar in a early Miata just drill a new hole about 3/4" in closer toward the bar bend.
Rear:
11mm - Mazda (NA, NB 1.6)
12mm - Mazda (NA 1.8)
1/2" - Addco, Ground Control
14mm - Mazdaspeed
9/16" - Addco
15mm - Eibach
5/8" Addco, BSP, Motorsports, Racing Beat, Flyin' Miata, PBC, Jackson Racing, Rod Millen.
16mm H&R NB
18mm H&R NA
E' un elenco incompleto, lo aggiorno man mano
La ND non esiste.
