This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.
  • 0 voto(i) - 0 media
  • 1
  • 2
  • 3
  • 4
  • 5
Consigli mega tagliando NC dei 100.000
#16
SymonDark Ha scritto:STRANO....la pulizia del debimetro l'ho fatta insieme a Sant (ha l'auto identica alla mia) e ho chiesto al mio meccanico di fiducia di fare la pulizia del corpo farfallato .... la differenza dopo è notevole....!!!

Peridicamente lo faccio anche sulla moto.....da sempre!!!

Scusa ma per la pulizia c'è da usare qualche prodotto apposta?
  Cita messaggio


Messaggi in questa discussione
Consigli mega tagliando NC dei 100.000 - da spawn2001ita - 30-01-2014, 13:01

Discussioni simili
Discussione Autore Risposte Letto Ultimo messaggio
  [NB FL] Consigli cassa e filtro aria motore floop 10 3,471 25-09-2025, 17:53
Ultimo messaggio: floop
  [NC] Consigli riduzione rumore scarico Mavelik 14 8,200 25-10-2023, 16:46
Ultimo messaggio: GioCas
  [NC/RC] Pulitore motore e additivo olio in fase di tagliando? Bulz 4 4,618 17-05-2023, 19:37
Ultimo messaggio: Rava86
  [NC/RC] chiedo consigli agli esperti del 1.8 MjK_it 9 6,573 14-05-2023, 22:47
Ultimo messaggio: MjK_it
  [NA] Consigli per radiatore e tubi siliconici mx5 Darius 12 8,451 26-02-2023, 22:50
Ultimo messaggio: Antonio
  [NA] Consigli su kit frizione! ricky92 15 17,269 25-05-2021, 13:54
Ultimo messaggio: Progressive87
Sad [NC] Dopo tagliando l'olio è per terra... gummobar 13 13,082 10-01-2021, 13:48
Ultimo messaggio: moer_modena
  [NB FL] Mega tagliando 1.6 Pk124 11 7,780 10-09-2020, 10:43
Ultimo messaggio: mrjam
  [NC] Consigli nel vano motore cisco27 2 3,262 21-06-2020, 15:38
Ultimo messaggio: cisco27
  [NC 1.8] Consigli: carburazione grassa? dr.funghetto 10 8,347 21-10-2019, 20:31
Ultimo messaggio: dr.funghetto



Utenti che stanno guardando questa discussione: 2 Ospite(i)