This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.
  • 0 voto(i) - 0 media
  • 1
  • 2
  • 3
  • 4
  • 5
aggiornamento su 17x8.25" ET35 - no roll
#87
Demios Ha scritto:Flex non è che saresti così gentile da postare una foto delle tue Neova da 225/45 sui cerchi da 8?
A tuo parere c'è spazio per metterle su un canale da 9 senza strecharla troppo?
E sui cerchi OEM ci entrano o sono troppo larghe?

[ATTACH=CONFIG]18740[/ATTACH]

[ATTACH=CONFIG]18741[/ATTACH]

[ATTACH=CONFIG]18743[/ATTACH]

Le 225 fittano bene sia sul cerchio da 7", sia sul cerchio da 9", ovviamente con effetti diversi. In USA in molti usano 225 su cerchio stock cosi' come ancora piu' gente usa le 235 su cerchio 9". La 225/45 stretcha in modo esattamente identico ad una 235/40 su cerchio da 9", in quanto l'inclinazione dei fianchi e' pressoche' identica, solo che la 235 "si ferma prima" in altezza (il disegno non e' in scala e non proporzionato):

[ATTACH=CONFIG]18742[/ATTACH]

Il cerchio 8" e' quello "ideale" per 225, ovviamente poi c'e' una tolleranza (anche prescritta dalle Case costruttrici, vedi tabelle Yokohama) di +/- 1" almeno, quindi entrambi i cerchi 7" e 9" sono comunque previsti.
Ovviamente poi l'effetto estetico e' soggettivo e dipende uno cosa vuole.


Allegati Anteprime
               
  Cita messaggio


Messaggi in questa discussione
aggiornamento su 17x8.25" ET35 - no roll - da Flex - 20-01-2013, 17:21

Discussioni simili
Discussione Autore Risposte Letto Ultimo messaggio
  [NA] Testine di sterzo e bump/roll steer HPDxxx 13 708 05-02-2024, 09:42
Ultimo messaggio: Alfatester
Smile [NA] Enkei 15x7 ET35 - Che freni mettere? fromkyoto 14 2,939 22-12-2021, 23:00
Ultimo messaggio: fromkyoto
  [NC/RC] Aggiornamento angoli Jo 195 82 19,442 21-06-2019, 16:11
Ultimo messaggio: pure_driver
  [NC] Roll necessario oppure no in base mie misure ? huskywr240 26 9,278 22-10-2017, 02:01
Ultimo messaggio: huskywr240
  [NA] Anti Roll Bar Brace Gasoline69 3 1,777 23-08-2017, 13:08
Ultimo messaggio: Fletch
  [NB] Coperchietti cerchi 15" OEM Strama 0 2,273 09-11-2016, 01:04
Ultimo messaggio: Strama
  [Vari] Cerchi autec w 7x16 et35 TommyMagnum 0 1,224 04-03-2015, 18:16
Ultimo messaggio: TommyMagnum
  [NA] Irrigidire la parte posteriore della scocca (no roll bar) Elwood Blues 25 6,441 29-06-2014, 14:04
Ultimo messaggio: Mexo Cinqo
  16x9 et15 al posteriore e 16x7 et35 pazzia o realtà? AndreaComo 5 1,699 19-03-2013, 19:20
Ultimo messaggio: Bisso
  17x8 et40 Daviz 11 3,174 10-01-2013, 14:43
Ultimo messaggio: ilGerry



Utenti che stanno guardando questa discussione: 2 Ospite(i)