This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.
  • 0 voto(i) - 0 media
  • 1
  • 2
  • 3
  • 4
  • 5
aggiornamento su 17x8.25" ET35 - no roll
#80
E questo commento chiarificatore da Goodwin:

We can get 17x9 45mm offset on the NC with 225mm tires and no rolling. Use a 235mm tire on that same 45mm offset 17x9 and you need some fender roll. Change the offset to 48mm and that 235 on 17x9 will just clear stock fenders.


  Cita messaggio


Messaggi in questa discussione
aggiornamento su 17x8.25" ET35 - no roll - da Flex - 06-02-2012, 03:04

Discussioni simili
Discussione Autore Risposte Letto Ultimo messaggio
  [NA] Testine di sterzo e bump/roll steer HPDxxx 13 2,656 05-02-2024, 09:42
Ultimo messaggio: Alfatester
Smile [NA] Enkei 15x7 ET35 - Che freni mettere? fromkyoto 14 5,029 22-12-2021, 23:00
Ultimo messaggio: fromkyoto
  [NC/RC] Aggiornamento angoli Jo 195 82 25,099 21-06-2019, 16:11
Ultimo messaggio: pure_driver
  [NC] Roll necessario oppure no in base mie misure ? huskywr240 26 12,249 22-10-2017, 02:01
Ultimo messaggio: huskywr240
  [NA] Anti Roll Bar Brace Gasoline69 3 2,266 23-08-2017, 13:08
Ultimo messaggio: Fletch
  [NB] Coperchietti cerchi 15" OEM Strama 0 2,577 09-11-2016, 01:04
Ultimo messaggio: Strama
  [Vari] Cerchi autec w 7x16 et35 TommyMagnum 0 1,470 04-03-2015, 18:16
Ultimo messaggio: TommyMagnum
  [NA] Irrigidire la parte posteriore della scocca (no roll bar) Elwood Blues 25 8,459 29-06-2014, 14:04
Ultimo messaggio: Mexo Cinqo
  16x9 et15 al posteriore e 16x7 et35 pazzia o realtà? AndreaComo 5 2,212 19-03-2013, 19:20
Ultimo messaggio: Bisso
  17x8 et40 Daviz 11 4,296 10-01-2013, 14:43
Ultimo messaggio: ilGerry



Utenti che stanno guardando questa discussione: 2 Ospite(i)